Features and Benefits
- Maximum 50% reduction of filter system and fewer elements to change out
- Multiple pleated layer construction with an inside to outside flow pattern
- High flow rates per filter cartridge – up to 110m³/hr (500GPM)
- High filtration area per filter cartridge – up to 8㎡
- High dirt holding capacity than traditional cartridges
- Inner core with high mechanical strength and hard cage outside
- PP(Polypropylene)materials in compliance with FDA regulations
- Available in 20 inch (508mm), 40 inch (1016mm) and 60 inch (1524mm) lengths
- Wide chemical compatibility for different applications
Applications
- Prefiltration for RO and Seawater Desalination
- Power Generation Condensate treatment
- Food & Beverage
- Petrochemicals and Refineries
- Paints and coatings
Technical Specifications
| Size | Length | 20″(508mm), 40″(1016mm), 60″(1524mm) | |
| OD | 6inch(152mm) | ||
| Filtration area | 2.7㎡@20inch, 5.4㎡@40inch, 8㎡@60inch | ||
| Materials | Filter Media | PP(Polypropylene)/ GF(Glass Fiber) | |
| End Cap/Inner Core/Outer Cage | PP(Polypropylene) | ||
| O-ring seal | EPDM / Buna-N / Silicone / Viton | ||
| Flow rate | Size | Max flow rate | Design Flow rate |
| 60inch | 110m³/hr | 51m³/hr | |
| 40inch | 76m³/hr | 32m³/hr | |
| 20inch | 39m³/hr | 18m³/hr | |
| Operation conditions | Max. Temperature | ~80 ℃ | |
| Recommended DP for change-out | 2.1-2.4bar | ||
