Features and Benefits
- High dirt holding capacity for long service life and lower replacement cost
- High efficiencies & flow rates & surface area compared with traditional bag filter
- Well replaced size #1 & size #2 bag filter and can Fit into all standard bag filter housings
- Inside-to-outside fluid flow ensure the impurities trapped inside the elements
- Two layers of PP(Polypropylene)or polyester media along with thermally bonded end caps help prevent particulate bypass
- Offer 5-10 times the surface area of traditional bag filters
- PP(Polypropylene)materials in compliance with FDA regulations
- Wide chemical compatibility for different applications
Applications
- Prefiltration for RO and Seawater Desalination
- Power Generation Condensate treatment
- Food & Beverage
- Petrochemicals and Refineries
- Paints and coatings
- Municipal Water
Technical Specifications
| Size | Length | 320mm (equivalent filter bag size#1)
660mm (equivalent filter bag size#2) |
|
| OD | 6inch(152mm) | ||
| Filtration area | 1.51㎡@Size #1 PP, 3.1㎡@Size#2 PP
1.69㎡@Size #1 GF, 3.48㎡@Size#2 GF |
||
| Materials | Filter Media | PP(Polypropylene)/ GF(Glass Fiber) | |
| End caps & Outer cage | PP(Polypropylene) | ||
| O-ring seal | EPDM / Buna-N / Silicone / Viton | ||
| Flow rate | Size | Max flow rate | Design Flow rate |
| Size 1# | 25m³/hr | 15m³/hr | |
| Size 2# | 40m³/hr | 25m³/hr | |
| Operation conditions | Max. Temperature | ~80 ℃ | |
| Recommended DP for change-out | 2.1-2.4bar | ||
